To use any of these key combinations, press and hold the keys immediately after pressing the power button to turn on your Mac, or after your Mac begins to restart. Keep holding until the described behavior occurs.

Download latest mac os to usb. I too am attempting this on the very same model of machine. I have found that it is possible to install directly to the flash drive without a second USB installer.However, it took on order of 8 hours to complete.

https://djbrown.amebaownd.com/posts/17120473. If you are using dynamic routing, then you need to redistribute these routes to the routing protocol from Palo Alto Networks. Packet captures on the Client on the GlobalProtect Adapter can help to compare the packets as sent by the client with what is received on the firewall and vice versa.4) Check whether there is proper route for the IP pool used by GlobalProtect on the network for reply traffic.

Mac Os X Boot From Thunderbolt Drivers
Mac Os X Boot From Thunderbolt Driver
Mac Os X Boot From Thunderbolt Drive Reviews
Mac Os X Boot From Thunderbolt Drives

Mac Os X Boot From Thunderbolt Drivers

The startup drives of Macs formatted with OS X 10.7 (Lion) or 10.8 (Mountain Lion) typically have a hidden partition designed just for moments like this. This 650MB partition is called Recovery HD.
Feb 01, 2018 Mac Secret Trick - How to Clone Mac Hard Drive with Disk Utility HDD SDD MacBook Pro iMac 2010-2019 - Duration: 10:09. Gunner Tierno x Yeezy God 349,655 views 10:09.

Command (⌘)-R: Start up from the built-in macOS Recovery system. Or use Option-Command-R or Shift-Option-Command-R to start up from macOS Recovery over the Internet. macOS Recovery installs different versions of macOS, depending on the key combination you use while starting up. If your Mac is using a firmware password, you're prompted to enter the password.
Option (⌥) or Alt: Start up to Startup Manager, which allows you to choose other available startup disks or volumes. If your Mac is using a firmware password, you're prompted to enter the password.
Option-Command-P-R:Reset NVRAM or PRAM. If your Mac is using a firmware password, it ignores this key combination or starts up from macOS Recovery.
Shift (⇧): Start up in safe mode. Disabled when using a firmware password.
D: Start up to the Apple Diagnostics utility. Or use Option-Dto start up to this utility over the Internet. Disabled when using a firmware password.
N: Start up from a NetBoot server, if your Mac supports network startup volumes. To use the default boot image on the server, hold down Option-N instead. Disabled when using a firmware password.
Command-S: Start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password.
T: Start up in target disk mode. Disabled when using a firmware password.
Command-V: Start up in verbose mode. Disabled when using a firmware password.
Eject (⏏) or F12 or mouse button or trackpad button: Eject removable media, such as an optical disc. Disabled when using a firmware password.

If a key combination doesn't work

If a key combination doesn't work at startup, one of these these solutions might help:

Mac Os X Boot From Thunderbolt Driver

Be sure to press and hold all keys in the combination together, not one at a time.
Shut down your Mac. Then press the power button to turn on your Mac. Then press and hold the keys as your Mac starts up.
Wait a few seconds before pressing the keys, to give your Mac more time to recognize the keyboard as it starts up. Some keyboards have a light that flashes briefly at startup, indicating that the keyboard is recognized and ready for use.
If you're using a wireless keyboard, plug it into your Mac, if possible. Or use your built-in keyboard or a wired keyboard. If you're using a keyboard made for a PC, such as a keyboard with a Windows logo, try a keyboard made for Mac.
If you're using Boot Camp to start up from Microsoft Windows, set Startup Disk preferences to start up from macOS instead. Then shut down or restart and try again.

Mac Os X Boot From Thunderbolt Drive Reviews

Plug the external drive into the Mac that you want to install the macOS on. Start up the Mac, holding down the Option/Alt key while it is booting up. Your Mac will display the Startup Manager.

Remember that some key combinations are disabled when your Mac is using a firmware password.

Learn more

Mac Os X Boot From Thunderbolt Drives

Learn what to do if your Mac doesn't turn on.
Learn about Mac keyboard shortcuts that you can use after your Mac has started up.